Lume Bulb Replacement
Instructions
Caution: Unplug Lamp before Beginning
(Refer to the
diagram below)
A. Turn the whole Lamp Upside
down and remove the (4) phillips head screws
B. Remove the bottom cover
C. Unscrew the (2) phillips head screws on the far right and left of the
inside of the lamp.
This will allow the lamp cover to be removed.
D. Twist and remove the Bulb out of the bulb holder by grasping the bulb at the metal ends.
Twist and gently pull the bulb from the socket. Insert and twist the
new bulb into place
(make
sure the 2 pins sit horizontally in place.)
Plug the lamp in, turn on the lamp and make certain the bulb has been properly
placed into the bulb holders. Now turn off the lamp and re-assemble by:
E. Replace the Lamp cover and secure with the (2) screws in the far right and
left sides.
F. Replace the bottom cover and secure the bottom with the remaining (4)
screws.
Simple instructions for replacing your Lume bulb. Your Bulb
should be replaced every
1 to 2 years depending on usage.
Note: Your Lume Lamp Bulb will loose it 's UV strength before it
burns out. It is like
a Tanning bulb that the Tanning Salons use.